5×5 CMOS capacitive sensor array for detection of the neurotransmitter dopamine

46Citations
Citations of this article
47Readers
Mendeley users who have this article in their library.
Get full text

Abstract

This work presents miniaturized CMOS (complementary metal oxide semiconductor) capacitive sensors for detection of the neurotransmitter dopamine (DA) down to the sub-fM range. Sensing resolution is significantly enhanced by monolithic sensor integration to reduce the parasitic effect and the use of sub-μm interdigitated microelectrodes as the sensing interface. The 5 × 5 sensor array contains five designs of different electrode sizes and each design has five sensors. The positive charges produced from protonation of boronate and amino group after immobilization of 4-carboxyphenylboronic acid (CPBA) result in an increase of the electrode-analyte capacitance. Then the negative charges produced after binding of CPBA and DA molecules decrease the electrode-analyte capacitance. Signal transduction is achieved through a CMOS readout circuit whose output frequency is inversely proportional to the capacitance. Experimental results showed the ratios of average percentage capacitance changes of the experiment groups over those of the control groups were all larger than one for the five designs at DA concentration of 0.1. fM. Selectivity against the non-analyte species, such as tyramine, has also been demonstrated. © 2010 Elsevier B.V.

Cite

CITATION STYLE

APA

Lu, M. S. C., Chen, Y. C., & Huang, P. C. (2010). 5×5 CMOS capacitive sensor array for detection of the neurotransmitter dopamine. Biosensors and Bioelectronics, 26(3), 1093–1097. https://doi.org/10.1016/j.bios.2010.08.065

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free