Electroflotation of precipitated phosphate from synthetic solution

4Citations
Citations of this article
16Readers
Mendeley users who have this article in their library.

Abstract

The phosphate recovery from a 20 mg L-1 Na2HPO4 solution through precipitation with Ca(OH)2 followed by electroflotation was evaluated. X-ray diffraction and particle size measurements indicated that the precipitates were a mixture of hydroxyapatite and calcium-deficient hydroxyapatite, with size ranging from 3 to 10 mm. Electroflotation with Na-oleate as surfactant was used to recover the precipitates. The surfactant adsorption was evaluated through zeta potential measurements. The influence of Na-oleate concentration, pH and bubble size on phosphate recovery was investigated. In the absence of Na-oleate, a phosphate recovery of 50% was achieved, while in the presence of 20 mg L-1 of Na-oleate it was increased to 90%, at pH 11. The phosphate recovery also increased with Ca(OH)2 concentration increase and bubble size decrease, reaching 100% at 300 mg L-1 Ca(OH)2 and bubble size around 39 μm.

Cite

CITATION STYLE

APA

Da Cruz, S. G., Monte, M. B. D. M., & Dutra, A. J. B. (2017). Electroflotation of precipitated phosphate from synthetic solution. Brazilian Journal of Chemical Engineering, 34(3), 821–830. https://doi.org/10.1590/0104-6632.20170343s20160040

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free