Vibration error compensation algorithm in the development of laser interference absolute gravimeters

Abstract

Measurement error arising from vibration interference is recognized as the primary obstacle limiting the accuracy and stability of laser interference absolute gravimeters. The present work addresses this issue by proposing a global search optimization algorithm that determines the optimal absolute value of gravity based on the measured time–displacement coordinates of a falling body and the signal obtained from the passive vibration isolation system of the inertial reference corner cube in a laser interference absolute gravimeter. Results of numerical calculations conducted under vibration interference conditions with added white noise resulting in a signal-to-noise ratio of 40 dB demonstrate the following 1. The accuracy and standard deviation of the gravimeter obtained using the proposed algorithm are 0.04 μGal (1 μGal D 1108 ms2) and 0.24 μGal, respectively, while those values obtained by the standard leastsquares solution are 10.19 and 154.11 μGal, respectively 2. The test results indicate that the average response of the reference value of acceleration due to gravity superimposed by a disturbance of 1.00 μGal is 1.01 μGal using the proposed algorithm and 0.87 μGal using the standard least-squares solution..