Sustainable Modification of Polyethersulfone Membrane with Poly(Maleic Anhydride-Co-Glycerol) as Novel Copolymer

Abstract

This work presented an endeavour to fabricate sustainable and eco-friendly polyethersulfone (PES) ultrafiltration membranes. A novel and graft copolymer (Poly(Maleic Anhydride-Co-Glycerol)) (PMG) have been synthesized via a facile and rapid route to impart their hydrophilic features onto the final PES membrane. A series of characterization tools, for both nanoadditives and nanocomposite membranes, have been harnessed to confirm their successful fabrication processes. These include Fourier Transform Infrared Spectroscopy (FT-IR), scanning electron microscopy (SEM), Atomic Force Microscopy (AFM), and contact angle measurements (CA). Results disclosed the successful synthesis of PMG nanoparticles that manifested a smooth homogenous surface with an average molecular size of 88.07 nm. The nanocomposite membrane structure has witnessed a gradual development upon each increment in the nanoparticle content ratio along with relatively thicker pore walls. The size and shape of figure-like micropores exhibited critical visible structural changes following the nanoadditive incorporation into the PES polymeric matrix. For the nanocomposite membrane, the SEM imaging indicated that a thicker active layer and less finger-like micropores were formed at higher PMG NP content within the membrane matrix. Hydrophilicity measurements disclosed a reversible correlation with the NP content where the CA angle value was at a minimum at the higher PMG loading content. Compared to the pristine membrane, a considerable enhancement in the performance of the modified membranes was witnessed. The membrane prepared using 2.5 g PMGNPs showcased six times higher pure water flux than neat PES membrane and maintained the highest retention (98%) against BSA protein solution. Additionally, the nanocomposite revealed promising antifouling and self-cleaning characteristics.