Design of a Super Wide Band Antenna and Measure of Ambient RF Density in Urban Area

21Citations
Citations of this article
18Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

A compact Super Wide band (SWB) antenna fed by coplanar waveguide (CPW) is proposed in this paper. The size of the antenna is 140× 100mm2 ( 0.16λ × 0.12λ ). The antenna originates from 3D volcano smoke antenna, and consists of a prolonged radiation patch and a symmetrical ground. Both the patch and ground were designed as smoothing structure, which can improve the impedance matching through a wide band. The simulated and measured bandwidth show that the antenna has a well-matched impedance bandwidth from 400MHz to higher than 20GHz under VSWR = 2 criterion, and the bandwidth ratio is greater than 50:1. The gain, efficiency and radiation pattern were all measured, and the maximum gain and efficiency are 6.3dBi and 96%, respectively. The antenna was also used to measure the ambient radiation frequency (RF) density in an urban area of Nanjing in China, which on the other hand proves the efficiency of this design.

Cite

CITATION STYLE

APA

Yang, L., Zhang, D., Zhu, X., & Li, Y. (2020). Design of a Super Wide Band Antenna and Measure of Ambient RF Density in Urban Area. IEEE Access, 8, 767–774. https://doi.org/10.1109/ACCESS.2019.2962141

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free