Impact of log(Kow) Value on the Extraction of Antibiotics from River Sediments with Pressurized Liquid Extraction

Abstract

The quantification of antibiotics (ABs) in sediments is an analytical challenge, but at the same time, it is indispensable to understand the fate of ABs in aquatic systems such as rivers. The aim of this study was to develop a comprehensive method to determine 19 ABs classified as macrolides, sulfonamides, fluoroquinolones, tetracyclines, clindamycin and trimethoprim in river sediments, using a combination of pressurized liquid extraction and solid phase extraction with the separation and detection with liquid chromatography coupled with mass spectrometry. Our results showed that the physical-chemical properties (e.g., log(Kow) value) of the analytes affected the extraction efficiency. Therefore, we propose to order ABs based on their log(Kow) values instead of traditional classification (macrolides, sulfonamides etc.) to select a suitable extraction solvent. ABs with log(Kow) values below zero (mainly fluoroquinolones and tetracyclines) were difficult to extract with all of the tested protocols compared to ABs with a log(Kow) larger than zero. After comparing different extraction protocols for ABs from solid and sediments, we concluded that recoveries in the range of 0.8 to 64.8% could be achieved for ABs with a log(Kow) value larger than zero using a mixture of acetonitrile and 50 mM phosphoric acid (50/50, v/v) in two extraction cycles at 100 °C.