Accurate evaluation of interface trap density at InAs MOS interfaces by using C-V curves at low temperatures

2Citations
Citations of this article
7Readers
Mendeley users who have this article in their library.

Abstract

A method to evaluate the interface trap density (D it) accurately by using high-frequency C-V curves at InAs MOS interfaces is experimentally examined, where quick responses of the interface traps at room temperature make D it evaluation based on the high-frequency C-V (Terman) method difficult. Therefore, low-temperature measurements of the C-V curves were performed to suppress the response of the interface traps. We studied the impact of the accuracy of the oxide capacitance C OX, distribution function, and C-V hysteresis owing to slow traps on the D it values evaluated by the Terman method. It was found that the accuracy of C OX and the choice of distribution function had a slight effect on the accuracy of the D it evaluation. It was also revealed that a measurement temperature lower than 40 K and limited gate voltage ranges in the C-V scan were indispensable for the accurate evaluation of D it.

Cite

CITATION STYLE

APA

Yoshizu, R., Sumita, K., Toprasertpong, K., Takenaka, M., & Takagi, S. (2023). Accurate evaluation of interface trap density at InAs MOS interfaces by using C-V curves at low temperatures. Japanese Journal of Applied Physics, 62. https://doi.org/10.35848/1347-4065/acb1bd

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free