Experimental research on the rotating detonation in gaseous fuels-oxygen mixtures

Abstract

An experimental study on rotating detonation is presented in this paper. The study was focused on the possibility of using rotating detonation in a rocket engine. The research was divided into two parts: the first part was devoted to obtaining the initiation of rotating detonation in fuel-oxygen mixture; the second was aimed at determination of the range of propagation stability as a function of chamber pressure, composition, and geometry. Additionally, thrust and specific impulse were determined in the latter stage. In the paper, only rich mixture is described, because using such a composition in rocket combustion chambers maximizes the specific impulse and thrust. In the experiments, two kinds of geometry were examined: cylindrical and cylindrical-conic, the latter can be simulated by a simple aerospike nozzle. Methane, ethane, and propane were used as fuel. The pressure-time courses in the manifolds and in the chamber are presented. The thrust-time profile and detonation velocity calculated from measured pressure peaks are shown. To confirm the performance of a rocket engine with rotating detonation as a high energy gas generator, a model of a simple engine was designed, built, and tested. In the tests, the model of the engine was connected to the dump tank. This solution enables different environmental conditions from a range of flight from 16 km altitude to sea level to be simulated. The obtained specific impulse for pressure in the chamber of max. 1.2 bar and a small nozzle expansion ratio of about 3.5 was close to 1,500 m/s. © 2011 The Author(s).