PIN-PMN-PT single crystal 1-3 composite-based 20 MHz ultrasound phased array

24Citations
Citations of this article
19Readers
Mendeley users who have this article in their library.

Abstract

Based on a modified dice-and-fill technique, a PIN-PMN-PT single crystal 1-3 composite with the kerf of 12 μmand pitch of 50 μmwas prepared. The as-made piezoelectric composite material behaved with high piezoelectric constant (d33 = 1500 pC/N), high electromechanical coefficient (kt = 0.81), and low acoustic impedance (16.2 Mrayls). Using lithography and flexible circuit method, a 48-element phased array was successfully fabricated from such a piezoelectric composite. The array element was measured to have a central frequency of 20 MHz and a fractional bandwidth of approximately 77% at-6 dB. Of particular significance was that this PIN-PMN-PT single crystal 1-3 composite-based phased array exhibits a superior insertion loss compared with PMN-PT single crystal and PZT-5H-based 20 MHz phased arrays. The focusing and steering capabilities of the obtained phased array were demonstrated theoretically and experimentally. These promising results indicate that the PIN-PMN-PT single crystal 1-3 composite-based high frequency phased array is a good candidate for ultrasound imaging applications.

Cite

CITATION STYLE

APA

Zhou, W., Zhang, T., Ou-Yang, J., Yang, X., Wu, D., & Zhu, B. (2020). PIN-PMN-PT single crystal 1-3 composite-based 20 MHz ultrasound phased array. Micromachines, 11(5). https://doi.org/10.3390/mi11050524

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free