Mechanical Characterization and Modeling of Large-Format Lithium-Ion Battery Cell Electrodes and Separators for Real Operating Scenarios

Abstract

This study presents a novel application-oriented approach to the mechanical characterization and subsequent modeling of porous electrodes and separators in lithium-ion cells to gain a better understanding of their real mechanical operating behavior. An experimental study was conducted on the non-linear stiffness of LiNi0.8Co0.15Al0.05O2 and graphite electrodes as well as PE separators, harvested from large-format lithium-ion cells, using compression tests. The mechanical response of the components was determined for different operating conditions, including nominal stress levels, mechanical loading rates, and mechanical cycles. The presented work describes the test procedure, the experimental setup, and an objective evaluation method, allowing for a detailed summary of the observed mechanical behavior. A distinct nominal stress level and mechanical cycle dependency of the non-linear stiffnesses of the porous materials were found. However, no clear dependency on compression rate was observed. Based on the experimental data, a poroelastic mechanical model was utilized to predict the non-linear behavior of these porous materials under real mechanical operating scenarios with a normalized root-mean-squared error less than 5.5%. The results provide essential new insights into the mechanical behavior of porous electrodes and separators in lithium-ion cells under real operating conditions, enabling the accelerated development of high-performing and safe batteries for various applications.