The Engine cylinder is one of the major automobile component, which is subjected to high temperature variations and thermal stresses. In order to cool the cylinder, fins are provided on the surface of the cylinder to increase the rate of Heat transfer. By doing thermal analysis on the engine cylinder and fins around it, It is helpful to know the heat dissipation rate and Temperature Distribution inside the cylinder. We know that, By increasing the surface area we can increase the heat dissipation rate, so designing such a large complex engine is very difficult. The main aim of the present project is to analyse the thermal properties like Directional Heat Flux, Total Heat Flux and Temperature Distribution by varying Geometry(Circular, Rectangular),material(Aluminium Alloy, Magnesium Alloy) and thickness of Fin (3mm,2mm) of an approximately square cylinder model prepared in SOLIDWORKS-2013 which is imported into ANSYS WORKBENCH-2016 for Transient Thermal analysis with an Average Internal Temperature and Stagnant Air-Simplified case as Cooling medium on Outer surface with reasonable Film Transfer Coefficient as Boundary Conditions.
CITATION STYLE
Mulukuntla Vidya Sagar, & Nalla Suresh. (2017). Thermal Analysis of Engine Cylinder with Fins by using ANSYS Workbench. International Journal of Engineering Research And, V6(06). https://doi.org/10.17577/ijertv6is060283
Mendeley helps you to discover research relevant for your work.