Some notes on Carbon at high temperatures and pressures

Abstract

Following the subject of my paper of 1888 to this Society, which will be referred to in a subsequent communication, attempts have recently been made to melt carbon by electrical resistance heating under pressure, and the following is a short summary of the results of about 100 experiments. The procedure has been on two lines. In the first, carbon is treated in bulk in a thick tube of 8 inches internal diameter of gun steel closed below by a massive pole of steel insulated from but gas tight with the mould and above by a closely fitting steel ram packed by copper rings imbedded in grooves in the ram or by leather and steel cups according to whether solids, liquids or gases are to be contained. The bore of the mould is generally lined with asbestos and after being charged the whole is placed under a 2000-ton press, the head and baseplate being insulated and connected to the terminals of a 300-kilowatt storage battery with coupling arrangements for 4, 8, 16 or 48 volts.