Hydrocracking of Heavy Vacuum Gas Oil with Petroleum Wax

Abstract

Petroleum heavy vacuum gas oil (HVGO) containing 10 wt.% of petroleum wax was hydrocracked at 390–430◦C and under the pressure of 18 MPa over a Ni W/amorphous silica-alumina catalyst in a continuous-flow fixed-bed reactor. The hydrocracking of a reference feed (neat HVGO) was carried out under the same reaction conditions. The physico-chemical properties of primary products obtained via laboratory atmospheric-vacuum distillation (heavy naphtha, middle distillates and distillation residue) were evaluated. Most products prepared from the mixed feedstock had a similar or lower density and sulfur content than the products obtained from the hydrocracking of the neat HVGO. The heavy naphtha fractions obtained from mixed feedstock contained slightly more n-alkanes and iso-alkanes and less naphthenes and aromatics. Similarly, middle distillates obtained from the mixed feedstock contained slightly more n-alkanes and less aromatics and had cetane index higher by up to 2 units.