Understanding and Mitigating Stickiness in Biochar Produced through Acid Hydrolysis and Dehydration

Abstract

Levulinic acid is a platform chemical with significant potential for conversion into a wide range of biobased chemicals and fuels. A common process for producing levulinic acid from lignocellulosic feedstocks involves acid hydrolysis and dehydration (AHDH), where hexose polymers are hydrolyzed into monomeric sugars and subsequently dehydrated to levulinic acid and formic acid in the presence of dilute sulfuric acid. However, scaling the AHDH process is challenging because of the formation of byproducts such as sticky biochar, which accumulates in continuous-flow reactors, reducing effective reaction volume and increasing process downtime. This study investigates the effect of a chemical preconditioning step on mitigating sticky biochar formation. Woody biomass was preconditioned at 170 °C with 0.26 wt % sulfuric acid for 30 min, resulting in substantial removal of hemicellulose and acid-soluble lignin. AHDH of these preconditioned solids produced biochar that did not adhere to reactor surfaces. TGA analysis confirmed that the chemical preconditioning step minimized interactions between hemicellulose-derived degradation products and lignin side chains, reducing sticky char formation. Additionally, the study observed a 6% higher yield of organic acids from softwood species compared to hardwoods, with bark content shown to negatively impact yield. These findings suggest that targeted preconditioning of lignocellulosic biomass can enhance reactor operability and improve organic acid production efficiency in AHDH processes.