Comparison of Microwave Oven and Convection Oven for Acid Hydrolysis of Dietary Fiber Polysaccharides

Abstract

Hydrolysis of dietary fiber polysaccharides (DFP) is an integral part of any enzymatic-chemical method for dietary fiber analysis. Residues obtained after enzyme treatments of fiber-containing foods are usually suspended in 12M sulfuric acid and kept at or slightly above ambient temperature for at least 1 h, and then the mixtures are diluted with deionized water to a final concentration of 1M or 2M acid, followed by heating at 100°C in a water bath or convection oven for 1 or 2 h. Under these hydrolytic conditions, some degradation of the released monosaccharides generally takes place over the duration of hydrolysis. We investigated the feasibility of using microwave energy as a heat source to reduce time and minimize degradation. Preliminary tests were done on the well-characterized soy polysaccharide Fibrim. With a microwave digestion system equipped with temperature and pressure monitors and control lines, optimum settings of power (5%, 75%), time (up to 3 min and 30 s), temperature (35°-55°C), and pressure (45-65 psi) were determined for different foods depending on the residue weight and volume of acid. Results were comparable for microwave oven and convection oven hydrolysis of DFP from 5 foods with good correlations for neutral sugar values; r2 = 0.997 for arabinose, 0.925 for galactose, 0.981 for glucose, 0.969 for mannose, and 0.990 for xylose.