Effective Combination of MOF and MoS2 Layers: A Novel Composite Material Capable of Rapidly Degrading Dyes

Abstract

This study successfully prepared MIL-101(Fe)@MoS2 composite photocatalysts via hydrothermal methods to address the efficient removal of refractory organic dyes in dye wastewater. Characterization using X-ray diffraction (XRD), Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) confirmed that molybdenum disulfide (MoS2) was uniformly loaded onto the surface of MIL-101(Fe), forming a heterojunction that significantly enhanced light absorption capacity and charge separation efficiency. In a visible-light-driven photo-Fenton system, this material exhibited excellent degradation performance for Congo red (CR). At an initial CR concentration of 50 mg/L, a catalyst dosage of 0.2 g/L, 4 mL of added H2O2, and pH 7, CR was completely degraded within 30 min, with the total organic carbon (TOC) removal reaching 72.5%. The material maintained high degradation efficiency (>90%) across a pH range of 3–9, overcoming the traditional Fenton system’s dependency on acidic media. Radical-trapping experiments indicated that superoxide radicals (·O2−) and photogenerated holes (·h+) were the primary active species responsible for degradation, revealing a synergistic catalytic mechanism at the heterojunction interface. Recyclability tests showed that the material retained 90.8% degradation efficiency after five cycles, and an X-ray photoelectron spectroscopy (XPS) analysis demonstrated the stable binding of Fe and Mo, preventing secondary pollution. This study provides a scientific basis for developing efficient, stable, and wide-pH adaptable photo-Fenton catalytic systems, contributing significantly to the advancement of green water treatment technologies.