Design and Evaluation of Modified Asphalt with Enhanced Stripping Resistance Based on Surface Free Energy

Abstract

Latent stripping has become increasingly apparent in asphalt pavements, particularly in highway rehabilitation and international construction projects supported by Official Development Assistance (ODA) from the Government of Japan. Stripping accelerates structural deterioration, making countermeasures essential. However, in ODA projects, securing high-quality aggregates or evaluating local materials is often difficult due to environmental and budgetary constraints. This study focused on Surface Free Energy (SFE) as a small-sample evaluation method and developed ten types of styrene–butadiene–styrene (SBS) polymers to enhance interfacial adhesion by targeting aggregate surface functional groups. The SFE of each Polymer-Modified Bitumen (PMB) and thirteen aggregates was measured, and the work of adhesion and moisture sensitivity index (MSI) were calculated for all combinations. Twenty-one Hot-Mix Asphalts (HMA) were then prepared and evaluated using the Hamburg Wheel Tracking Test (HWTT) based on load cycles to stripping initiation (LCSN) and to 12.5 mm rut depth (LCST). The developed PMBs showed a higher work of adhesion, a lower MSI, and substantially increased LCSN and LCST values. Strong negative correlations were observed between MSI and both HWTT indicators, confirming the utility of SFE-based MSI for material screening. This study demonstrates that interface-targeted PMBs can improve stripping resistance, thereby promoting the use of lower-quality aggregates in durable pavements.