Mechanical, Thermal Properties and Void Characteristics of Bamboo Fiber-Reinforced Epoxy Resin Composites Prepared by Vacuum-Assisted Resin Transfer Molding Process

Abstract

This study aimed to examine the effect of epoxy resin (EP) systems on the impregnation of bamboo fibers (BFs) by EP and the properties of BF/EP composites prepared by vacuum-assisted resin transfer molding (VARTM) process. BF preforms obtained by solution suspension method were used as reinforcement, and epoxy/anhydride system (EP-1), epoxy/amine system (EP-2) and two-component epoxy system (EP-3) were employed as matrix; on this basis, BF/EP-1, BF/EP-2 and BF/EP-3 composites were prepared by VARTM. The physical, mechanical and thermal properties and void characteristics of BF/EP composites were characterized. The results showed that EP-1 with a viscosity of 265 mPa·s at 23°C and an operating time of room temperature without curing was beneficial for the EP-1 to impregnate BFs adequately and uniformly. The incorporation of BFs into EP-1 significantly improved the flexural, shear and impact properties, thermal properties and interface properties of EP-1. Moreover, the properties of BF/EP-1 composites were better than those of BF/EP-2 and BF/EP-3 composites. Three-dimensional X-ray microscopy scans revealed that the volume and distribution of voids in the BF/EP composites differed significantly depending on the EP systems, and the percentage of void volume in the BF/EP-1 composites was only 0.14% in 3D reconstruction models.