Influencing factors analysis and simulation calibration of restitution coefficient of rice grain

Abstract

It is difficult to determine the coefficient of restitution accurately due to the small size, light weight, and complex influencing factors of rice grain. In the study, the experimental principle of restitution coefficient was described by the impact method, and the restitution coefficients of four typical rice varieties in Northeast China were measured. According to the orthogonal experiment, the primary and secondary factors affecting the restitution coefficient of rice grain were collision material, spring compression (initial collision velocity), moisture content, and rice variety. A single factor test was carried out for the significant factors, and the results showed that: The restitution coefficient of rice grain to a Q235 steel plate, plexiglass plate, seed plate, and rubber plate decreased in turn, and the restitution coefficient gradually decreased with the increase of spring compression (initial collision velocity), and with the increase of water content. The restitution coefficient was obtained by a bench test and simulation test, and the results were 0.429 and 0.423, respectively. The reason for the error was discussed and analyzed, which effectively verified the validity of the measurement of the restitution coefficient of small grain size. This study provides a method for the determination of the restitution coefficient of small grain, and provides a reference for the optimization design of threshing and a cleaning device of the combine harvester and high-speed precision seeder.