Testing the Properties of Cement and Gypsum Boards Reinforced with Nonwoven Fabrics Made of Waste and Recycled Fibres

Abstract

The article attempts to assess the possibility of using non-woven fabrics made of waste fibers in cladding panels. For this purpose, woolen and polypropylene nonwovens were tested for mass per unit area, characteristic opening size, and lengthwise and crosswise elongation at maximum strength. Non-woven fabrics were placed in the middle of the thickness of cement and gypsum boards and subjected to tests of density, thermal conductivity coefficient λ, and bending strength. The influence of individual nonwoven fabrics with different properties on the properties of the finished composite was determined. It was found that wool nonwoven fabrics had the best effect on the thermal conductivity coefficient. A better affinity for nonwoven fabrics was shown by gypsum mortar. The best influence on the bending strength of the panels had polyester non-woven fabrics with the lowest mass per unit area and the largest characteristic opening size.